Mini-Tele - Part 3: A splash of color

Subtle...

As previously mentioned - my son asked for a gold guitar.  

I said, "Everything gold?"

He said, "Everything!"

I said, "...okay."

I said, "...are you sure?"

He said, "I'm sure!"

(editor's note - when I told him the humbucker wasn't going to be gold - he got upset)

Okay.  Here we go!

Gold digger

Two things:

1) I've never spray painted a guitar before.  This is my fifth build (sixth if you count the incomplete Les Paul that still sits on top of my fridge) and I've finished all of them with stain, dye, or shellac under a Nitro finish.  I've got nothing against paint - it's just that all of my builds to date have been made with fairly attractive wood that I wanted to showcase and not hide under paint.  So this is new territory for me (read: plenty of NEW mistakes for me to make).

2) The medium of a blog is rife with dishonesty.  I didn't take a lot of photos of the process of painting the guitar.  So, it looks like this went swimmingly.  I can attest that it did not.  Also, time is a plaything in the blog medium.  This thing sat for months in my garage waiting for me to get my backside in gear and finish it.

Lies, damn lies, and statistics...

In brief:  I painted this with a generic gold color I purchased at Lowes and neither I nor my son was all that impressed.  It was only after stumbling on a really metallic gold paint (by accident in A.C. Moore) that we got to the color you see now.  Then, as I was preparing to spray a lacquer finish on it - I decided to wipe it down with some naphtha.  ...It had loads of dust (and cobwebs) on it from sitting all summer in my garage and I wanted a clean surface to spray on.  Yeah, it turns out that naphtha will strip spray-paint off like nobody's business.  So, I had to paint the guitar a third time.  Only this time the temperature had dropped and I was spraying in temps way too cold for rattle cans.  So, I'm not confident in how well the paint bonded to the previous coats.

When I finally did get to spraying lacquer - I was using a new brand - Watco - Lacquer, Gloss, Spray

...Let's just say - I'll never be using that brand again.  Stick with Behlan's Stringed Instrument Lacquer, kids.  It works!

I had already started spraying the neck with Behlans so I decided to not mix the streams with a different lacquer on the neck.  In the end, the body got 8 to 10 coats of Watco and the neck got 8 to 10 coats of Behlans.  The neck looks great (even though I used steel wool to dull the finish) and the body looks barely passable.  I never even finished polishing the body as weird black spots were starting to show up under the finish as I waxed on/waxed off.  This could have been the spray-paint I used, the temperature at which I sprayed things, or the lacquer.  Seeing as the neck had none of these issues and the only difference was what lacquer I used - you be the judge.

How you doin'?

With regards to the neck.  I did a fair amount of work to it.  I received it with a badly damaged finish (which I expected for $25).  I sanded off the existing finish and also reshaped the neck a bit.
Knowing that this will be a first guitar and not likely to be used for more than a year or two in this household - I went for comfort over perfection.  I skinny-ed down the neck at the 1st and 2nd frets
so that it would fit in my son's hand and perhaps make it possible for him to play first position (e.g. cowboy) chords.

Can't complain

I also worked on the fret ends quite a bit.  The fret ends were sticking out like barbed wire - so I filed those down and polished the frets as well.  I did a little fret leveling but not much.  If he gets to the point where he's ready to start ripping out an Angus Young solo - I'll dress these frets to perfection.  For now, the neck fits in his hand, won't cut him, and is mostly in tune.

Had some work done?

I also inlaid an Irish coin into the headstock because for some reason that has become my thing.  In this case, this is the first time I've used legal tender.  This is a 10 cent Euro coin.  I used it because it is gold colored.  It was a fabulous piece of good luck that I had a drill bit that was almost the exact size of this coin.  I'm happy with this part of the build.

So, while it's not perfect - the guitar now has a finish.  It's time to assemble it!